How to Tie an Albright Knot
The Albright knot is the right solution if you are attempting to join two pieces of filament together that have different diameters. In fact, this knot is often used to join braided line unbraided filament together. The Albright knot when properly constructed is the best method of ensuring that these two unequal sized lines stay firmly attached. The Albright is simple to create and with a bit of practice you can master the technique.
There are four simple steps to successfully creating an Albright knot they are:
First find the ends of each line. Select the heaviest of the two lines and create a loop that resembles the head of a basic sewing needle and hold it firmly in between your left thumb and forefinger;
2. Slip the thin piece of filament through the loop you have just created. Hold that loop in place and carefully and neatly begin winding the thin line around the base of the loop in the heaviest filament. Wrap the line 8-10 times and when you are done what you should see is a design similar to a hangman’s noose.
3. This step is critical, as you will be strengthening your Albright knot in this step. Carefully thread the thin monofilament back through the loop that you created – in the same direction that you originally placed it through.
4. To further strengthen your Albright knot, wet the entire knot and tug on the two ends until they are tightly joined. This helps add the additional strength that you will need for successful fishing. Now you can trim the ends and your Albright knot is ready to be used on your favorite reel.
When you are wrapping your line, take your time. Make sure that it is wrapped as neatly as possible. Not only will a neat knot be much stronger, but if you are sloppy in the creation of your knot, you will find that it may hang up in your guides or make your reel perform poorly. This is almost always a mistake that is made by beginners. Consider it this way – the smoother the knot the more likely it is to glide through your reel and your guides – similar to the way a kink in your line will go through. A poorly constructed knot could hang up in the gears. Some anglers who are concerned about end frays will place a drop of super glue on the end of each line to prevent any fraying.
If you are interested in experimenting with the Albright knot, you can do so by creating a crisscross design. This is done simply by winding the line five times in a downward motion then reversing and coming back up five times to create the crisscross. This method creates an even stronger Albright knot and the overall results will be more eye appealing. While eye appeal isn’t more critical than strength, it can’t hurt.
When you are getting prepared for a saltwater fishing adventure, having the proper equipment is essential. Some of the most popular products on the market include okuma fishing reels and van staal reel.
